Tripp Lite Smart Online Expandable 3000VA 3U Rack / Tower UPS System

Rack/Tower UPS System Features:

• SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values
• Standard internal battery set offers 17 minutes runtime at half load (1200W) and 6 minutes at full load (2400W)
• Optional BP72V15-2U external battery pack increases runtime to 39 minutes at half load (1200W) and 17 minutes at full load (2400W /limit 1)
• Optional BP72V28RT-3U external battery pack increases runtime to 78 minutes at half load (1200W) and 34 minutes at full load (2400W / multi-pack compatible)
• Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot
• HID compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X and Linux
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage setpoints
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA L5-30P input plug / NEMA 5-15/20R, L5-20R & L5-30R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has four outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations; no time consuming connection of internal batteries by user required
• Single line TEL/DSL or network ethernet line surge suppression