Bogen Telephone Paging Access Module with Power Supply |
| (Model # TAMB2PS) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Telephone Paging Access Module is a paging module that provides a means of interfacing various analog telephone port types to a paging system amplifier. This enables a facility's telephone system to be used to make audio announcements over its paging system.
TAMB2PS Paging Access Module Features:
- The TAMB2 will interface to analog loop start and
ground start trunk ports as well as analog ring-up station lines
- Allows for the connecting of an external audio or music
source that will play over the paging system when no pages are in progress
- Various DIP switches and controls provide a wide range of flexibility over how the access module will operate
- Can be mounted on a wall, mounted as a single unit in a rack (optional rack mount kit required) or mounted 2-up, side-by-side in a single rack space
- Loop start, ground start, and station port (90V ring up) compatibility
- 600-ohm output
- Built-in confirmation tone indicating access
to paging system (defeatable)
- Built-in pre-announce tone produced over paging
system before announcement (defeatable)
- Adjustable tone volume
- Works with one-way and two-way (talk back) zones
- Background music input with volume control
- Suppresses background music during paging
- Station access disconnect is dynamically
controlled using a combination of disconnect
timer, silence interval timer, and Calling Party
Control (CPC) signal detection
- Disconnect VOX timer is adjustable from 1 to 11
seconds (defeatable)
- Station Port maximum page times from 1 - 200
seconds
- VOX and default timers independently inhibitable
- Calling Party Control (CPC) signal from switch
immediately disconnects station port
- 1 C-Form (N.O. and N.C.) contact pair available
for operating external equipment
- Trunk Timer feature helps prevent system
blockage
- 24 V Talk Battery
- 24V DC @ 150mA power supply required
(not included)
- FCC Part 68 Registered
- Listed to UL Standard 60950 for US and Canada
- 1 Rack Space Unit Height
- Dimensions: 8 1/2" W x 1 3/4" H x 3" D
| |
|
Email Page
